| CCNP 1: Building Scalable Internetworks v 5.0 |
| Scalable Network Design |
| EIGRP |
| OSPF |
| Integrated IS-IS |
| Route Optimization |
| BGP |
| IP Multicasting |
| IPv6 |
| Case Studies |
| Case Study 1: EIGRP |
| Case Study 2: OSPF with Four Routers |
| Case Study 3: OSPF with Five Routers (Optional) |
Case Study 4: BGP |
|
| CCNP 2:Implementing Secure Converged Wide-area Networks v 5.0 |
| Remote Network Connectivity Requirements |
| Teleworker Connectivity |
| IPsec VPNs |
| Frame Mode MPLS Implementation |
| Cisco Device Hardening |
| Cisco IOS Threat Defense Features |
| Case Studies |
| Case Study 1: CLI IPsec and Frame-Mode MPLS |
| Case Study 2: SDM |
| CCNP 3: Building Multilayer Switched Networks v 5.0 |
| Network Requirements |
| Defining VLANs |
| Implementing Spanning Tree |
| Implementing Inter-VLAN Routing |
| Implementing High Availability in a Campus Environment |
| Wireless LANs |
| Configuring Campus Switches to Support Voice |
| Service Loss and Data Theft in a Campus Network |
| Case Studies |
| Case Study 1: VLANs, VTP and Inter-VLAN Routing |
| Case Study 2: Voice and Security in a Switched Network |
|
| CCNP 4: Optimizing Converged Networks v 5.0 |
| Converged Network Connectivity Requirements |
| Cisco VoIP Implementations |
| Introduction to IP QoS |
| Implement the DiffServ QoS Model |
| Implement Cisco AutoQoS |
| Implement Wireless Scalability |
| Case Studies |
| Case Study 1: QoS and MLPPP |
CCNP - Учебен план
